6 IN 1 HEDAO Bluetooth PH TDS EC Chlorine ORP TEMP
swimming pool water quality tester BLE-YC01
Range :
PH: 0.00~14.00pH
TEMP: 0.1-60.0°C; 32.0-140.0℉
TDS: 0~9999ppm
EC: 0~100009uS/cm
Chlorine: 0.1~4.0mg/L
ORP: -1200~+1200mV
Resolution:
PH: 0.01pH
TEMP: 0.1°C;0.1℉
TDS: 1ppm, 0.1ppt
EC: 1uS/cm;
Accuracy:
PH: ±0.05pH
TEMP: ±0.5℃
TDS/EC: ±2%F.S
1) The mobile phone comprehensively displays all measurement functions, and the data is clear at a glance. Support mobile control with backlight and without backlight, displayed the battery level.
2) View data at any time, data can be saved automatically or manually, the time interval for saving the data can be automatically adjusted ,and data sharing is supported., data save as excel .so that the data changes can be easily
grasped.
3) The mobile phone can set the upper and lower limits of PH and TDS/EC. Set them according to your needs. When the valueyou set exceeds the test range, the interface will display a red value abnormally.
4) 5-point calibration, option two set of calibration modes, calibration records can be viewed
6) PH Two calibration methods---4.00+6.86+9.18 PH Power or 4.00+7.00+10.01 PH Power
Notice :
The water in the swimming pool should be between 6.5-8ph and ORP should be between 487-840mv, and the chlorine value will be displayed normally. Chlorine will not be displayed if either value is out of range
If the PH value is lower than 6.5, it means that the water quality is too acidic and impurities, and it is necessary to add
disinfectant water for disinfection.
If the ORP value is above 850mv, it means that the disinfectant has been added too much, and it is necessary to add water or change the water for neutralization.
Only support test swimming pool water quality.
Please be sure to tighten the cover when using it, do not open it, otherwise it is easy to get water
German
French
Italian
Portuguese
Japanese
Korrean
Russian
